Fatigue Failure Analysis Of Bogie Frame Due To Static Load

Authors

  • Ilham Satrio Utomo Politeknik Perkeretaapian Indonesia Madiun
  • Ajeng Tyas Damayanti Politeknik Perkeretaapian Indonesia Madiun
  • Baihaqi Fadhilah Muhammad Politeknik Perkeretaapian Indonesia Madiun

DOI:

https://doi.org/10.37367/jrtt.v3i1.38

Keywords:

Bogie frame, Endurance limit, Normal service, Goodman-smith diagram

Abstract

This bogie design is used on trains. The purpose of simulation testing is necessary to ensure the strength and safety of the bogie frame design. Tests carried out to determine the durability of a construction are fatigue testing simulations. Fatigue failure is caused by fluctuating loads and it is necessary to simulate fatigue testing on the bogie. The method used in this research is the finite element method. The static test simulation results show that the maximum von Mises stress of 135.47 occurs at element 1675 with a safety factor of 2.4. The test simulation results on 9 loading combinations have a maximum average value of 110.16 MPa.

References

K. Anam Basyar et al., “Analisis Kekuatan Desain Struktur Bogie Frame Kereta Ukur pada Kondisi Beban Normal Service dengan Metode Elemen Hingga,” Jurnal Perkeretaapian Indonesia (Indonesian Railway Journal, vol. 6, no. 2, 2022.

M. Kassner, “Fatigue Strength Analysis Of A Welded Railway Vehicle Structure By Different Methods,” Int J Fatigue, vol. 34, no. 1, pp. 103–111, Jan. 2012, doi: 10.1016/j.ijfatigue.2011.01.020.

Jung-Won Seo, “The Fatigue Life Evaluation And Load History Measurement For Bogie Frame Of Locomotive”.

M. Quaresimin, L. Susmel, and R. Talreja, “Fatigue Behaviour And Life Assessment Of Composite Laminates Under Multiaxial Loadings,” Int J Fatigue, vol. 32, no. 1, pp. 2–16, Jan. 2010, doi: 10.1016/j.ijfatigue.2009.02.012.

W. Fricke, A. Von Lilienfeld-Toal, and H. Paetzold, “Fatigue Strength Investigations Of Welded Details Of Stiffened Plate Structures In Steel Ships,” Int J Fatigue, vol. 34, no. 1, pp. 17–26, Jan. 2012, doi: 10.1016/j.ijfatigue.2011.01.021.

J. W. Seo, H. M. Hur, H. K. Jun, S. J. Kwon, and D. H. Lee, “Fatigue Design Evaluation of Railway Bogie with Full-Scale Fatigue Test,” Advances in Materials Science and Engineering, vol. 2017, 2017, doi: 10.1155/2017/5656497.

J. W. Han, J. D. Kim, and S. Y. Song, “Fatigue Strength Evaluation Of A Bogie Frame For Urban Maglev Train With Fatigue Test On Full Scale Test Rig,” Eng Fail Anal, vol. 31, pp. 412–420, Jul. 2013, doi: 10.1016/j.engfailanal.2013.01.009

Downloads

Published

2024-05-30

How to Cite

Utomo, I. S., Damayanti, A. T., & Muhammad, B. F. (2024). Fatigue Failure Analysis Of Bogie Frame Due To Static Load. Journal of Railway Transportation and Technology, 3(1), 40–46. https://doi.org/10.37367/jrtt.v3i1.38

Issue

Section

Articles